? 221 west industry court deer park, ny 11729-4681 (631) 586-7600 fax (631) 242-9798 ? ? world wide web site - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron semiconductor technical data data sheet 523, rev. b silicon schottky rectifier die very low forward voltage drop 200 c operating temperature applications: ? switching power supply ? converters ? free-wheeling diodes ? polarity protection diode features: ? soft reverse recovery at low and high temperature ? very low forward voltage drop ? low power loss, high efficiency ? high surge capacity ? guard ring for enhanced durability and long term reliability ? guaranteed reverse avalanche characteristics ? electrically / mechanically stable during and after packaging ? out performs 100 volt ultrafast rectifiers maximum ratings: characteristics symbol condition max. units peak inverse voltage v rwm - 100 v max. average forward current i f(av) 50% duty cycle, rectangular wave form 120 a max. peak one cycle non- repetitive surge current i fsm 8.3 ms, half sine wave (1) 1650 a non-repetitive avalanche energy e as t j = 25 c, i as = 1.3 a, l = 24 mh 19.0 mj repetitive avalanche current i ar i as decay linearly to 0 in 1 s ? limited by t j max v a =1.5v r 1.3 a max. junction temperature t j - -65 to +200 c max. storage temperature t stg - -65 to +200 c electrical characteristics: characteristics symbol condition max. units max. forward voltage drop v f1 @ 120a, pulse, t j = 25 c 0.87 v v f2 @ 120a, pulse, t j = 125 c 0.72 v max. reverse current i r1 @v r = 100v, pulse, t j = 25 c 2 ma i r2 @v r = 100v, pulse, t j = 125 c 48 ma max. junction capacitance c t @v r = 5v, t c = 25 c f sig = 1mhz, v sig = 50mv (p-p) 3000 pf (1) in shd package sd275sc100a/b/c
? 221 west industry court deer park, ny 11729-4681 (631) 586-7600 fax (631) 242-9798 ? ? world wide web site - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron technical data data sheet 523, rev. b mechanical dimensions: in inches / mm sd275sc100a/b/c top side(anode) metallization: a = al - 25 k? minimum, figure 1 b = ag - 30 k? minimum, figure 1 c = au - 12 k? min, figure 2 bottom side (cathode) metallization: a, b, c = ti/ni/ag - 30 k? minimum. figure 1 fi g ure 2 d h h b a schottky chip moly attached schottky die
? 221 west industry court deer park, ny 11729-4681 (631) 586-7600 fax (631) 242-9798 ? ? world wide web site - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 forward voltage drop - v f (v) 10 -2 10 -1 10 0 10 1 10 2 instantaneous forward current - i f (a) typical forward characteristics 125 c 200 c 175 c 25 c 0 20 40 60 80 100 120 reverse voltage - v r (v) 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 instantaneous reverse current - i r (ma) typical reverse characteristics 25 c 50 c 75 c 100 c 125 c 150 c 200 c 175 c 0 20 40 60 80 100 120 reverse voltage - v r (v) 500 1000 1500 2000 2500 junction capacitance - c t (pf) typical junction capacitance sensitron technical data data sheet 523, rev. b sd275sc100a/b/c disclaimer: 1- the information given herein, including the specifications and di mensions, is subject to change without prior notice to impr ove product characteristics. before ordering, purchasers are advised to contact the se nsitron semiconductor sales department for the latest version of the datasheet(s). 2- in cases where extremely high reliabili ty is required (such as use in nuclear pow er control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users? fail-safe precauti ons or other arrangement . 3- in no event shall sensitron semiconductor be liable for any damage s that may result from an accident or any other cause duri ng operation of the user?s units according to the datasheet(s). sensitron semiconductor assume s no responsibility for any intellectual prope rty claims or any other problems that may result from applic ations of information, products or ci rcuits described in the datasheets. 4- in no event shall sensitron semiconductor be liable for any fa ilure in a semiconductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- no license is granted by the datasheet (s) under any patents or other rights of an y third party or sens itron semiconductor. 6- the datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed writ ten permissi on of sensitron semiconductor. 7- the products (technologies) described in the datasheet(s) are no t to be provided to any party whose purpose in their applica tion will hinder maintenance of international peace and safety nor are they to be applied to that pur pose by their direct purchasers or any thir d party. when exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulatio ns
|
